SNBEiEx BAY52 – Fluorescent Light Explosion Proof
Model Implication
BAY 52 – x
J1: with emergency (without it, no note)
x1: ceiling type (side cable entry)
f: flange type
installation method h: guardrail type
b: wall type
L: hanging chain type
Number of lamps
Single tube power
Design number
Explosion-proof fluorescent lamp
Application
- Widely used for work lighting in dangerous environments such as oil exploration, oil refining, chemical industry, and military industry, as well as offshore oil platforms, tankers, etc;
- Suitable for places with high humidity and high protection requirements;
- Suitable for Zone 1 and Zone 2 locations with explosive gas environments;
- Applicable to places in zones 20, 21 and 22 of explosive dust environments;
- Suitable for ǁ A, ǁ B and ǁ C explosive gas environments;
- Applicable to T1 – T6 temperature groups.
Product features
- High-power integrated LED light source, with ultra-long life and maintenance-free use for many years. The lifespan is 100 times that of incandescent lamps and 6 to 10 times that of metal halide lamps;
- High efficiency and energy saving, the effective luminous efficiency is about 139Plm/w, the power factor is as high as 0.99, and it saves more than 80% of electricity than incandescent lamps;
- Good stability, it can still start normally and work stably within the voltage fluctuation range of 160~265V;
- Green and environmentally friendly, it has passed the national EMC inspection, has no electromagnetic pollution, no flicker, and is not prone to eye fatigue;
- Instant start, no delay required when starting and restarting, can light up instantly.
- The light source has good colour rendering, colour rendering index ≥80.
- Aluminum alloy die-casting shell, surface sprayed with high-voltage electrostatic spray;
- High-quality tempered glass transparent tube with high light transmittance;
- Stainless steel exposed fasteners with high anti-corrosion performance;
- Emergency devices can be equipped according to user requirements. When the power supply is cut off, the lamps will automatically switch to emergency lighting status;
- Various installation methods, and adjustable installation methods can be customized according to user requirements. When replacing the lamp, one end of the lamp can be put down;
- Both steel pipe and cable wiring can be used.
With emergency function parameters
Emergency starting time (s) |
Charging time (h) |
Emergency lighting time (min) |
≤0.3 |
24 |
≥90 |
Product specifications
Model |
Power (W) |
Explosion-proof signs |
Protection level |
Light body type |
BAY52- x |
18×1 |
Exd II BT6
Exd II CT6/DIP A20 TA, T6 |
IP65 |
I |
18×2 |
II |
36×1 |
III |
36×2 |
IV |
Main technical parameters
Implementation standards : GB3836.1ˎ GB3836.2ˎ GB12476.1ˎ IEC60079-1ˎ IEC61241-0ˎ IEC61241-1ˎ EN60079-0ˎ EN60079-1ˎ EN61241-0ˎ EN61241-1
Explosion-proof mark : Exd II BT6 Exd II CT6/DIP A20 TA, T6
Rated voltage : AC220V 50Hz
Protection level : IP65
Anti-corrosion grade : WF1 *WF2
Inlet device : G3/4” inlet specification, suitable for $10mm~14mm cables
Terminal block : ≤2.5mm2 wire reliable connection
Installation method : Ceiling type 1 (x1), ceiling type 2 (x2), boom type 1 (g1), boom type 2 (g2), hanging chain type (L), flange type (f), guardrail type (n), bent rod type (w), wall type (b)
Light source power : 18Wx1, 18Wx2, 36Wx1, 36Wx2
Product appearance and installation diagram
Order note
- Select items one by one according to the product model description and indicate the explosion-proof mark. For example: if II B single-tube 18W flange installation is required, the product selection is BAY52-18x1f Exd II BT6;
- When double-tube fluorescent lamps are used as emergency lighting, only one lamp with emergency function;
- This lamp is equipped with a light source when it leaves the factory.
SNBEiEx BAY52 – Fluorescent Light Explosion Proof
Bergaransi
Gratis Ongkir Jabodetabek